Test Kits

Aqua Medic PH 4 TEST FLUID 60ML

Replacement pH 4 probe calibration fluid for use with the all pH-Computers and test equipment.

Learn More

Aqua Medic PH 7 TEST FLUID 60ML

Replacement pH 7 probe calibration fluid for use with the all pH-Computers and test equipment.

Learn More

Aqua Medic PH 9 TEST FLUID 60ML

Replacement pH 9 probe calibration fluid for use with the all pH-Computers and test equipment.

Learn More

Ideal for commercial use. Includes a carrying case with belt clip. Highly efficient and accurate due to its advanced microprocessor technology. Hold Function: saves measurements for convenient reading and recording. Auto-off function: the meter shuts off automatically after 10 minutes of non-use to conserve batteries. Measurement Range: 0-9990 ppm. From 0-999 ppm, the resolution is in increments of 1ppm. From 1000 to 9990 ppm, the resolution is in increments of 10ppm, indicated by a blinking 'x10' image. Built-in digital thermometer Display: large and easy-to-read LCD screen. Factory Calibrated: our meters are calibrated with a 342 ppm NaCl solution. Meters can be recalibrated with a mini-screwdriver. Also available in "x10" mode: reads in increments only of 10 ppm (0-9990 ppm). Learn More

Digital Ph Pen PH-0/14A Learn More

DM-1: In-Line Dual TDS Monitor

The DM-1 is consumer friendly monitor measuring feed (input) water vs. product (output) water of a water filtration system at any time. This device is ideal for Reverse Osmosis (RO), Deionized water (DI) filtration systems that work well in variety of application such as drinking or potable water, Aquariums, Hydroponics and many more.

FEATURES:

• Displays TDS levels feed water and product water with in & out electrode probes
• Efficient and accurate with advanced microprocessor technology
• Auto-Off function conserves battery power. (Shuts off automatically after 10 minutes of non-use)
• Factory Calibrated: our meters are calibrated with a 342 ppm NaCl solution. Meters can be recalibrated with a mini-screwdriver.
• Comes equipped with Mur-lok® Quick-Connect T-fittings
• Installs quickly and easily

Learn More

DM-2: Commercial In-Line Dual TDS Monitor

The DM-2 is a commercial grade monitor measuring TDS feed (input) water vs. product (output) water of a water filtration system at any time. With its shielded cables and diagnostic messaging this robust device is ideal for Reverse Osmosis (RO), Deionized water (DI) filtration systems that work well in applications such as drinking or potable water, Water treatment, Aquariums, Hydroponics and many more.

FEATURES:

• Highly efficient and accurate due to its advanced microprocessor technology
• Displays TDS levels of the Feed Water and Product Water with in & out electrode probes
• Auto-Off function conserves battery power (Shuts off automatically after 3 minutes)
• Factory Calibrated: our meters are calibrated with a 342 ppm NaCl solution. The DM-2 features digital calibration.
• Diagnostic error messaging
• Shielded sensor cables
• Comes equipped with 1/4 inch Mur-lok® Quick-Connect T-fittings (Also available with 3/8″ or 1/2″ fittings)

Learn More

Refractometer, Maintaining a stable salinity is one of the most important aspects of reef tank husbandry. Gone are the days when the serious hobbyist relied on Hydrometers to keep tabs on this crucial parameter. Now these vital measurements are easily monitored with the Microbe Lift ™ Refractometer.

Learn More

Aiptasia eXit is reef-safe and does not harm any invertebrates unless they are injected inside their tissue or mouth. To get rid of the nasty Aiptasia inject theminside their mouth. Learn More

The Salifert Ammonia test is very straightforward and measures the sum of toxic ammonia and ammonium in just a few minutes. Learn More

Salifert Copper TEST KITS Learn More

Salifert Calcium liquid 500ml Calcium is a major constituent of calcareous algae, skeletal material of hard corals and the skeletal needles of soft/leather corals. Calcium also fulfills many biological functions. These processes result in depletion of calcium. Quite often a too low calcium concentration retards growth of corals and calcareous algae. NSW (Natural Sea Water) contains 400 - 450 mg/L calcium. This is also the value we should strive for. Learn More

Iodine is present in NSW (Natural seawater) in a very low concentration (0.06 mg/L or 0.06 ppm). Learn More

About KH + pH Buffer

It is a highly concentrated, fast dissolving powder which increases alkalinity(carbonate hardness) and stabilizes the pH at the correct value. In these ways it contributes significantly to the health of all aquarium inhabitants including corals, coralline algae and fish. Within 24 hours it will acquire the pH corresponding to other aquarium parameters. Should the pH remain low within 24 hours of corrective measures then an insufficient gaseous exchange (inefficient aeration) is quite often the cause.

Learn More

Salifert Magnesium liquid 500ml Magnesium is an essential trace element which also helps stabilize alkalinity. Learn More

Salifert Natural Iodine 500ml About Natural Iodine Salifert's Natural Iodine supplement contains a large portion iodate and also some iodide in similar proportions as NSW. All ingredients are of a pharmaceutical quality or even better. This ensures that no unwanted elements are added to your valuable aquarium. Learn More

Salifert Natural Strontium 500ml Strontium is probably important for accelerating coral and calcareous algae growth. NSW (Natural Sea Water) contains approx. 7 - 9 mg/L strontium. This strontium is associated (”chelated”) with sulfate. Since the growth of corals and calcareous algae goes hand in hand with strontium and calcium depletion, depletion of calcium (which is very easily measurable) usually means depletion of strontium as well. About Natural Strontium Strontium supplements should be designed in such a way that a too low or a too high strontium concentration is avoided. With this supplement we have reached this aim with an easy-to-use formulation. Learn More

Nitrite is a substance that is toxic to fish and invertebrates. Learn More

The pH value can have a major impact on the growth of corals and calcareous algae and on many biological processes. Learn More

Salifert Phosphate Eliminator 500ml Phosphate Eliminator binds phosphate and is removed by skimming more effectively than normal. When we dose it to the reef or marine aquarium, it immediately makes phosphate unavailable to algae. It also avoids binding of phosphate to corals, live rock and sand, increasing the ability of corals and calcareous algae to grow much faster. The phosphate bound by this supplement and not removed by skimming within 24 hours will be set free again by bacterial action. This will be especially the case when dealing with a rather high phosphate concentration. Learn More