Reverse Osmosis & Water Purifiers

1/4 Inch Reverse Osmosis Red Pipe Per Meter Learn More

1/4 Inch Reverse Osmosis White Pipe Per Meter Learn More

3/8 Inch Reverse Osmosis White Pipe Per Meter Learn More

AquaForest Demineralization Resin

High quality Demineralization Resin – designed for water demineralization, used in RO filters mainly as the last stage of tap water purification.

Learn More

Re-fillable DI resin cartridge (full), 9¾" deionization cartridge, 480 grains. Product comes complete, ready for installation.Re-fillable DI resin cartridge (full), 9¾ Inch deionization cartridge, 480 grains. Di cartridge • Designed for deionizing water up to 16 megohms • All materials and construction are FDA-compliant Refillable Cartridge These high-capacity, semi-conductor grade resin cartridges are ideal for use in aquarium applications that requires minimum organics. Replacement 9 3/4" cartridge for the de-ionizing chamber of a 4 stage reverse osmosis or RO DI Learn More

Clear Refillable DI Resin Cartridge 10” X 2.5”

These cartridges come pre filled with our mixed bed (both cation and anion) colour changing DI resin.

These cartridges come standard with built-in pre and post filters to keep the DI resin from being washed out of the filter cartridge.

 

REEF GRADE MIXED BED COLOUR-CHANGING DEIONIZATION RESIN supplied in this kit.

A mixed bed deionization resin is the final, polishing stage of the RO/DI system. It will remove any contaminants that may have passed through your sediment/carbon filters and RO membrane. This stage will achieve the 0 TDS RO water you need for a successful reef aquarium.

The DI resin supplied is a mixed bed (both cation and anion) with colour changing indicator to let you know when it has become exhausted. The resin starts as a dark blue colour that will turn gold as it becomes exhausted. This gives you a very visual indicator, making sure you know when it is time for it to be replaced.

Learn More

Ideal for commercial use. Includes a carrying case with belt clip. Highly efficient and accurate due to its advanced microprocessor technology. Hold Function: saves measurements for convenient reading and recording. Auto-off function: the meter shuts off automatically after 10 minutes of non-use to conserve batteries. Measurement Range: 0-9990 ppm. From 0-999 ppm, the resolution is in increments of 1ppm. From 1000 to 9990 ppm, the resolution is in increments of 10ppm, indicated by a blinking 'x10' image. Built-in digital thermometer Display: large and easy-to-read LCD screen. Factory Calibrated: our meters are calibrated with a 342 ppm NaCl solution. Meters can be recalibrated with a mini-screwdriver. Also available in "x10" mode: reads in increments only of 10 ppm (0-9990 ppm). Learn More

DM-1: In-Line Dual TDS Monitor

The DM-1 is consumer friendly monitor measuring feed (input) water vs. product (output) water of a water filtration system at any time. This device is ideal for Reverse Osmosis (RO), Deionized water (DI) filtration systems that work well in variety of application such as drinking or potable water, Aquariums, Hydroponics and many more.

FEATURES:

• Displays TDS levels feed water and product water with in & out electrode probes
• Efficient and accurate with advanced microprocessor technology
• Auto-Off function conserves battery power. (Shuts off automatically after 10 minutes of non-use)
• Factory Calibrated: our meters are calibrated with a 342 ppm NaCl solution. Meters can be recalibrated with a mini-screwdriver.
• Comes equipped with Mur-lok® Quick-Connect T-fittings
• Installs quickly and easily

Learn More

DM-2: Commercial In-Line Dual TDS Monitor

The DM-2 is a commercial grade monitor measuring TDS feed (input) water vs. product (output) water of a water filtration system at any time. With its shielded cables and diagnostic messaging this robust device is ideal for Reverse Osmosis (RO), Deionized water (DI) filtration systems that work well in applications such as drinking or potable water, Water treatment, Aquariums, Hydroponics and many more.

FEATURES:

• Highly efficient and accurate due to its advanced microprocessor technology
• Displays TDS levels of the Feed Water and Product Water with in & out electrode probes
• Auto-Off function conserves battery power (Shuts off automatically after 3 minutes)
• Factory Calibrated: our meters are calibrated with a 342 ppm NaCl solution. The DM-2 features digital calibration.
• Diagnostic error messaging
• Shielded sensor cables
• Comes equipped with 1/4 inch Mur-lok® Quick-Connect T-fittings (Also available with 3/8″ or 1/2″ fittings)

Learn More

Dow Filmtec Reverse Osmosis Membranes 100GL TW30-1812-100   400 litres per day)

Learn More

Dow Filmtec Reverse Osmosis Membranes 50GL TW30-1812-50 (200 litres per day) Learn More

MS Filter Sock XL200 180mm Learn More

Filtersocks are the most effective and convenient form of mechanical filtration. Learn More

Filtersocks are the most effective and convenient form of mechanical filtration. Learn More

Refractometer, Maintaining a stable salinity is one of the most important aspects of reef tank husbandry. Gone are the days when the serious hobbyist relied on Hydrometers to keep tabs on this crucial parameter. Now these vital measurements are easily monitored with the Microbe Lift ™ Refractometer.

Learn More

DM-2: Commercial In-Line Dual TDS Monitor

The DM-2 is a commercial grade monitor measuring TDS feed (input) water vs. product (output) water of a water filtration system at any time. With its shielded cables and diagnostic messaging this robust device is ideal for Reverse Osmosis (RO), Deionized water (DI) filtration systems that work well in applications such as drinking or potable water, Water treatment, Aquariums, Hydroponics and many more.

FEATURES:

• Highly efficient and accurate due to its advanced microprocessor technology
• Displays TDS levels of the Feed Water and Product Water with in & out electrode probes
• Auto-Off function conserves battery power (Shuts off automatically after 3 minutes)
• Factory Calibrated: our meters are calibrated with a 342 ppm NaCl solution. The DM-2 features digital calibration.
• Diagnostic error messaging
• Shielded sensor cables
• Comes equipped with 1/4 inch Mur-lok® Quick-Connect T-fittings (Also available with 3/8″ or 1/2″ fittings)

Learn More

 

Ultraviolet Light Water Purifier Reverse Osmosis UV Sterilizer 11W

 

Product Features 

 

• Total Plastic Unit
• Capacity: 1 GPM
• Inlet / Outlet: 1/4" Quick Connect
• Length: 12"
• UV lamp: 11W
• Voltage:230v
• UV Lamp Life: 9000 hours (about 1 year)
• Osram G5 11W Germicidel Globe

 

Ultraviolet Light Water Purifier Reverse Osmosis UV Sterilizer is high quality 11W and 1GPM Ultraviolet Sterilizer Water Filtration unit.
This system is good to kill harmful Bacteria, E Coli, Viruses Fungi, Algae and most microorganisms including cryptosporidium, giardia and many other contaminants. 

 

We highly recommend the use of our UV sterilizers as a post treatment when treating water. All microorganisms are virtually susceptible to ultraviolet disinfection. For every penny of operating cost, hundreds of gallons of water are purified. 

 

No additional chemicals are added and there’s no danger of overdosing. Once the water leaves the purifier, it is ready for use with no further contact time required. It is simple to use and easy to install and maintain. Compact units need a small space to operate and store. There are no detections of chlorine taste or corrosion problems.

 

Learn More

Wave Reef Auto Top Up Float System + RO Tap Connector 

Complete top up valve & bracket system for your aquarium or sump to conect up to a gravety feed or Auto RO unit. 
Includes RO pipe tap connector.
Easy-to-install float valve for aquarium auto top off systems
Attach to a water source and install on your aquarium sump
Create an auto top off system that maintains aquarium water level

Aquarium float valve kit offers a simple solution to maintain proper water level. Use the Float Valve as part of an automatic top-off system you create to replenish aquarium water lost through evaporation. Magnet mount now offer full range of water level adjustment for versatile installation options.

Features nylon screws (no metal parts) for corrosion- and rust-free use.

Includes 3-1/2" x 2" dia Float, Valve Assembly,

Suction cup mount

 

Learn More