Welcome to our online shop!

Maxspect

11 Item(s)

List  Grid 

Set Descending Direction
  1. Maxspect Gyre 200 Series XF280 Single Pump

    Maxspect Gyre 200 Series XF250 Power: 8-60 watts Maximum flow: 5300 GPH. Maximum Tank Range: 800 gallons. Included with the kit: 1 XF250 gyre pump, an Advanced Controller box and one power supply. Learn More
    $594.95

  2. Maxspect Gyre XF280 Pump Only no controller (Requires Controller)

     

    Maxspect Gyre XF280 Pump only no controller (Requires Controller) Transformer included
    Maxspect Gyre Generator Pump only
    This will allow upgrading from a XF280 to a Twin XF-280 - This pump will only work with a XF280 Controller and the controller is not supplied with the pump.

     

    Learn More
    $382.49

  3. Maxspect Turbine Duo TD-12K DC Pump

     Maxspect Turbine Duo TD-12K DC Pump

    Single IN/OUT - Flow: 1,585gph   |    Head: 12.5ft    |    Wattage: 75w
    Double IN/OUT -  Flow: 3,011gph    |    Head: 11ft    |    Wattage: 115w
    Combined IN/OUT -  Flow: 2,400gph    |    Head: 11.5ft    |    Wattage: 110w

    For submerged applications only!

    MULTI APPLICATION DC WATER PUMP
    Expandable to TWO Outputs
    Capable of Multiple Configurations
    Super Efficient Performance
    Utilizes Sine Wave Technology for Silent Operation
    Ultra Compact Flow
    Multi-Directional Output(s)
    Complete with Accessories and Adapters
    Wireless Control with easy-to-use Syna-G app*
    *Maxspect Connect ICV6 and smart device are required, but not included, for wireless wifi connection and advanced controllability. 
    Learn More
    $532.50

  4. Maxspect Turbine Duo TD-6K DC Pump

     

    Maxspect Turbine Duo TD-6K DC Pump

     

    The first water pump that is configurable to the typical single input/output pump configuration as well as a dual input/output for additional flow reaching 1720gph!  

     

    Available Output Configurations  

     

    Single IN/OUT - Flow: 1,060gph    |    Head: 8.5ft    |    Wattage: 35w 

     

    Double IN/OUT -  Flow: 1,720gph    |    Head: 8ft    |    Wattage: 48w 

     

    Combined IN/OUT -  Flow: 1,320gph    |    Head: 7.5ft    |    Wattage: 45w  

     

    MULTI APPLICATION DC WATER PUMP 

     

    Expandable to TWO Outputs
    Capable of Multiple Configurations
    Super Efficient Performance
    Utilizes Sine Wave Technology for Silent Operation
    Ultra Compact Flow
    Multi-Directional Output(s)
    Complete with Accessories and Adapters
    Wireless Control with easy-to-use Syna-G app*
    *Maxspect Connect ICV6 and smart device are required, but not included, for wireless wifi connection and advanced controllability.  

     

    THE FIRST EXPANDABLE DC WATER PUMP
    The Maxspect Turbine Duo is the first EXPANDABLE water pump available for both freshwater and marine hobbysts. 
    It is capable of pushing 1,000 GPH using a single output or, best of all, add a second impeller to the same pump and increase your flow to 1,720 GPH!  That is a total of 860 GPH per output.  Even better, combine the two outputs into a single output (adapter included) and get 1,320 GPH from a single output!  

     

    Versatile and Multi-purpose
    The dual output design makes the Turbine Duo an ideal pump for multi-purpose applications such as a return pump(s) AND feed manifolds.  Or use the pump as a return pump AND media reactor OR chillers OR UV, etc

     

    Compact Performance
    The Turbine Duo features three (3) separate configurations. I can replace two "regular" pumps.  Break down the pump to a ultra compact powerhouse using far less space within your sump. 

     

    Outstanding Efficiency
    The Turbine Duo offers high performance while consuming less energy than the competition.  It is incredibly quiet! 

     

    Complete Set of Accessories
    Each Turbine Duo comes with a complete set of adapters and accessories for simple to install to almost any system right out of the box.

     

    Learn More
    $361.20

  5. Maxspect Turbine Duo TD-9K DC Pump

     Maxspect Turbine Duo TD-9K DC Pump

    The first water pump that is configurable to the typical single input/output pump configuration as well as a dual input/output for additional flow 
    Available Output Configurations  
     
    MULTI APPLICATION DC WATER PUMP 
    Expandable to TWO Outputs
    Capable of Multiple Configurations
    Super Efficient Performance
    Utilizes Sine Wave Technology for Silent Operation
    Ultra Compact Flow
    Multi-Directional Output(s)
    Complete with Accessories and Adapters
    Wireless Control with easy-to-use Syna-G app*
    *Maxspect Connect ICV6 and smart device are required, but not included, for wireless wifi connection and advanced controllability.    
    Versatile and Multi-purpose
    The dual output design makes the Turbine Duo an ideal pump for multi-purpose applications such as a return pump(s) AND feed manifolds.  Or use the pump as a return pump AND media reactor OR chillers OR UV, etc
    Compact Performance
    The Turbine Duo features three (3) separate configurations. I can replace two "regular" pumps.  Break down the pump to a ultra compact powerhouse using far less space within your sump.  
    Outstanding Efficiency
    The Turbine Duo offers high performance while consuming less energy than the competition.  It is incredibly quiet!  
    Complete Set of Accessories
    Each Turbine Duo comes with a complete set of adapters and accessories for simple to install to almost any system right out of the box.

     

    Learn More
    $416.45

  6. NEMPROTECT POWERHEAD GUARD FOR Gyre Maxspect XF130/230

    NEMPROTECT POWERHEAD GUARD FOR Gyre Maxspect XF130/230

    Wavemaker Guards 
    With the recent influx of 3D printed products hitting the market, there have been a handful of innovative products. The new NemProtect stands out as a really great answer to the needs of anemone keepers everywhere. Flow is a critical element in reef and anemone tanks, but powerheads pose a serious risk to wandering anemones. Not only can a powerhead destroy a prized anemone, but the result can threaten the entire tank if not caught immediately.

    One of the most popular solutions for in-tank flow is the Gyre Maxspect XF130/230 pumps. While the foam guards can keep anemones from getting pulled into the wet side cage, they clog quickly with detritus and reduce flow dramatically. The new NemProtect guards create a greater surface area for water flow while simultaeniously diffusing the intake suction and increasing distance from the powerhead. The Nemprotect literally just slips onto the Gyre and stays put via friction fit. The front of the cover comes off, facilitating maintenance. Anemones can't get through the numerous tiny holes, and the high surface area of the guard avoids clogging and reduces flow loss. The result is a long-lasting, low maintenance anemone guard that improves overall flow in the system; a win-win!

    Features:

    • Wider, gentler intake flow

    • Reduced flow loss

    • Long lasting

    • Low maintenance

    Material: 3D printed from reef-safe PETG plastic

    What’s Included?

    1x NemProtect anemone guard for Maxspect XF130 / 230

    Learn More
    $111.17

  7. NEMPROTECT POWERHEAD GUARD FOR Gyre Maxspect XF150/250

    NEMPROTECT POWERHEAD GUARD FOR Gyre Maxspect XF150/250

    Wavemaker Guards 
    With the recent influx of 3D printed products hitting the market, there have been a handful of innovative products. The new NemProtect stands out as a really great answer to the needs of anemone keepers everywhere. Flow is a critical element in reef and anemone tanks, but powerheads pose a serious risk to wandering anemones. Not only can a powerhead destroy a prized anemone, but the result can threaten the entire tank if not caught immediately.

    One of the most popular solutions for in-tank flow is the Gyre Maxspect XF150/250 pumps. While the foam guards can keep anemones from getting pulled into the wet side cage, they clog quickly with detritus and reduce flow dramatically. The new NemProtect guards create a greater surface area for water flow while simultaeniously diffusing the intake suction and increasing distance from the powerhead. The Nemprotect literally just slips onto the Gyre and stays put via friction fit. The front of the cover comes off, facilitating maintenance. Anemones can't get through the numerous tiny holes, and the high surface area of the guard avoids clogging and reduces flow loss. The result is a long-lasting, low maintenance anemone guard that improves overall flow in the system; a win-win!

    Features:

    • Wider, gentler intake flow

    • Reduced flow loss

    • Long lasting

    • Low maintenance

    Material: 3D printed from reef-safe PETG plastic

    What’s Included?

    1x NemProtect anemone guard for Maxspect XF150 / 250

    Learn More
    $131.38

  8. NEMPROTECT POWERHEAD GUARD FOR Jebao OW-10

    NEMPROTECT POWERHEAD GUARD FOR Jebao OW-10

     

    Wavemaker Guards 
    With the recent influx of 3D printed products hitting the market, there have been a handful of innovative products. The new NemProtect stands out as a really great answer to the needs of anemone keepers everywhere. Flow is a critical element in reef and anemone tanks, but powerheads pose a serious risk to wandering anemones. Not only can a powerhead destroy a prized anemone, but the result can threaten the entire tank if not caught immediately.

    One of the most popular solutions for in-tank flow is the Jebao OW-10 pumps. While the foam guards can keep anemones from getting pulled into the wet side cage, they clog quickly with detritus and reduce flow dramatically. The new NemProtect guards create a greater surface area for water flow while simultaeniously diffusing the intake suction and increasing distance from the powerhead. The Nemprotect literally just slips onto the wet side of the Jebao OW pump and stays put via friction fit. The front of the cover comes off, facilitating removal from the wet side for maintenance. Anemones can't get through the numerous tiny holes, and the high surface area of the guard avoids clogging and reduces flow loss. The result is a long-lasting, low maintenance anemone guard that improves overall flow in the system; a win-win!

    Features:

    • Wider, gentler intake flow

    • Reduced flow loss

    • Long lasting

    • Low maintenance

    What’s Included?

    1x NemProtect anemone guard for Jebao OW-10

    Learn More
    $60.60

  9. NEMPROTECT POWERHEAD GUARD FOR Jebao OW-25

    NEMPROTECT POWERHEAD GUARD FOR Jebao OW-25

     

    Wavemaker Guards 
    With the recent influx of 3D printed products hitting the market, there have been a handful of innovative products. The new NemProtect stands out as a really great answer to the needs of anemone keepers everywhere. Flow is a critical element in reef and anemone tanks, but powerheads pose a serious risk to wandering anemones. Not only can a powerhead destroy a prized anemone, but the result can threaten the entire tank if not caught immediately.

    One of the most popular solutions for in-tank flow is the Jebao OW-25 pumps. While the foam guards can keep anemones from getting pulled into the wet side cage, they clog quickly with detritus and reduce flow dramatically. The new NemProtect guards create a greater surface area for water flow while simultaeniously diffusing the intake suction and increasing distance from the powerhead. The Nemprotect literally just slips onto the wet side of the Jebao OW pump and stays put via friction fit. The front of the cover comes off, facilitating removal from the wet side for maintenance. Anemones can't get through the numerous tiny holes, and the high surface area of the guard avoids clogging and reduces flow loss. The result is a long-lasting, low maintenance anemone guard that improves overall flow in the system; a win-win!

    Features:

    • Wider, gentler intake flow

    • Reduced flow loss

    • Long lasting

    • Low maintenance

    What’s Included?

    1x NemProtect anemone guard for Jebao OW-25

    Learn More
    $70.75

  10. NEMPROTECT POWERHEAD GUARD FOR VORTECH MP10

    NEMPROTECT POWERHEAD GUARD FOR VORTECH MP10

    Wavemaker Guards 
    With the recent influx of 3D printed products hitting the market, there have been a handful of innovative products. The new NemProtect stands out as a really great answer to the needs of anemone keepers everywhere. Flow is a critical element in reef and anemone tanks, but powerheads pose a serious risk to wandering anemones. Not only can a powerhead destroy a prized anemone, but the result can threaten the entire tank if not caught immediately.

    One of the most popular solutions for in-tank flow is the Ecotech Vortech pumps. While the foam guards can keep anemones from getting pulled into the wet side cage, they clog quickly with detritus and reduce flow dramatically. The new NemProtect guards create a greater surface area for water flow while simultaeniously diffusing the intake suction and increasing distance from the powerhead. The Nemprotect literally just slips onto the wet side of the Vortech pump and stays put via friction fit. The front of the cover comes off, facilitating removal from the wet side for maintenance. Anemones can't get through the numerous tiny holes, and the high surface area of the guard avoids clogging and reduces flow loss. The result is a long-lasting, low maintenance anemone guard that improves overall flow in the system; a win-win!

    Features:

    • Wider, gentler intake flow

    • Reduced flow loss

    • Long lasting

    • Low maintenance
    Learn More
    $50.55

  11. NEMPROTECT POWERHEAD GUARD FOR VORTECH MP60

    NEMPROTECT POWERHEAD GUARD FOR VORTECH MP60

    Wavemaker Guards 
    With the recent influx of 3D printed products hitting the market, there have been a handful of innovative products. The new NemProtect stands out as a really great answer to the needs of anemone keepers everywhere. Flow is a critical element in reef and anemone tanks, but powerheads pose a serious risk to wandering anemones. Not only can a powerhead destroy a prized anemone, but the result can threaten the entire tank if not caught immediately.

    One of the most popular solutions for in-tank flow is the Ecotech Vortech pumps. While the foam guards can keep anemones from getting pulled into the wet side cage, they clog quickly with detritus and reduce flow dramatically. The new NemProtect guards create a greater surface area for water flow while simultaeniously diffusing the intake suction and increasing distance from the powerhead. The Nemprotect literally just slips onto the wet side of the Vortech pump and stays put via friction fit. The front of the cover comes off, facilitating removal from the wet side for maintenance. Anemones can't get through the numerous tiny holes, and the high surface area of the guard avoids clogging and reduces flow loss. The result is a long-lasting, low maintenance anemone guard that improves overall flow in the system; a win-win!

    Features:

    • Wider, gentler intake flow

    • Reduced flow loss

    • Long lasting

    • Low maintenance
    Learn More
    $70.75

11 Item(s)

List  Grid 

Set Descending Direction