Welcome to our online shop!

Aquaforest

Items 1 to 20 of 48 total

Page:
  1. 1
  2. 2
  3. 3

List  Grid 

Set Descending Direction
  1. AquaForest CA Plus 150ml

    Component designed for supplementing iodine and fluorine in marine aquarium. It should be applied at least once a week in a dosage of 10 drops for 10l of aquarium water or 10ml (one top) for 200l (54 US gal.) of water – with average coral planting.
    US: 19 drops for 5 US gal. of aquarium water or 10ml (one cap) for 54 US gal. of water.

    Learn More
    $8.65

  2. AquaForest CA Plus 2000ml

    Component designed for supplementing iodine and fluorine in marine aquarium. It should be applied at least once a week in a dosage of 10 drops for 10l of aquarium water or 10ml (one top) for 200l (54 US gal.) of water – with average coral planting.
    US: 19 drops for 5 US gal. of aquarium water or 10ml (one cap) for 54 US gal. of water.

    Learn More
    $34.05

  3. AquaForest Carbon 1000ml

    High quality granulated active carbon. Eliminates undesirable chemical compounds in marine and freshwater aquariums. Carbon should be placed in flow filters in 100 ml for 100 l (27 US gal.) of water in marine aquarium or 200 l (54 US gal.)in freshwater aquarium.

    Recommended flow is maximum 500l/h through the media.

    The insert should be replaced every 4 weeks.

    Learn More
    $18.80

  4. AquaForest Carbon 5L

    High quality granulated active carbon. Eliminates undesirable chemical compounds in marine and freshwater aquariums. Carbon should be placed in flow filters in 100 ml for 100 l (27 US gal.) of water in marine aquarium or 200 l (54 US gal.)in freshwater aquarium.

    Recommended flow is maximum 500l/h through the media.

    The insert should be replaced every 4 weeks.

    Learn More
    $79.98

  5. AquaForest Components Strong ABCK 50ml

    Solution increasing temporary hardness level in marine aquariums. Application: 10ml of the solution increases KH level of 0,5°dKH in 100l of water. Maximum daily dosage is 20ml in 100l of water. Temporary hardness level in reef aquarium should be kept at around 6,5° – 8,0°dKH
    US: 2 tsp of the solution increases KH level of 0.5dKH in 27 US gal. of water. Maximum daily dosage is 4 tsp in 27 US gal. of water.

    Learn More
    $33.36

  6. AquaForest KH Plus 150ml

    Solution increasing temporary hardness level in marine aquariums. Application: 10ml of the solution increases KH level of 0,5°dKH in 100l of water. Maximum daily dosage is 20ml in 100l of water. Temporary hardness level in reef aquarium should be kept at around 6,5° – 8,0°dKH
    US: 2 tsp of the solution increases KH level of 0.5dKH in 27 US gal. of water. Maximum daily dosage is 4 tsp in 27 US gal. of water.

    Learn More
    $9.79

  7. AquaForest MG Plus 150ml

    Solution increasing magnesium level in marine aquariums. Application: 10ml of the solution increases Mg level of 5mg/l in 100l (27 US gal.) of water. Maximum daily dosage is 20ml in 100l of water. Magnesium level in reef aquarium should be kept at around 1300mg/l.

    Learn More
    $8.65

  8. AquaForest MG Plus 2000ml

    Solution increasing magnesium level in marine aquariums. Application: 10ml of the solution increases Mg level of 5mg/l in 100l (27 US gal.) of water. Maximum daily dosage is 20ml in 100l of water. Magnesium level in reef aquarium should be kept at around 1300mg/l.

    Learn More
    $34.05

  9. AquaForest AF Frag Rocks 24pcs

    AquaForest AF Frag Rocks 24pcs

    High quality and biology neutral rocks designed to easy fragging. Our artificial rocks resemble natural live rock and unlike ceramic rocks, they are made of light materials and have high porosity. They are a perfect filtration medium and a perfect habitat for a number of beneficial microorganisms. With Aquaforest rocks aqua-scaping is easy, as they can be quickly cut, arranged and attached, and they are available in a variety of shapes.

    Learn More
    $12.50

  10. AquaForest AF Poly Glue 600g

    Polymer adhesive for corals.
    Usage: Glue granules should be placed in hot water (about 60ºC/ 140ºF); after a few minutes easily forming mass will create, which has the best adhesive properties. The adhesive will become completely solid when placed in the aquarium. We recommend that gluing process is performed out of the water. Coral can be placed in the water 30 seconds after bonding. Unused mass can be used again. Biodegradable product.

    Learn More
    $29.99

  11. AquaForest AF Protect Dip 50ml

    AquaForest AF Protect Dip 50ml
    A disinfecting solution for bathing corals. Thoroughly cleanses the surface of coral. Reduces the risk of developing many diseases, examples: tissue necrosis, coral bleaching, mycosis, AEFW or Brown Jelly Syndrome. The formula is perfect for introducing new corals into the tank and for quarantine. The bathing process ensures healthy appearance, growth and development of corals. In addition, the solution is safe for corals, contains no iodine or oxidizing compounds.

    Usage:
    Carry out the bath out of the tank. Shake before use. Dissolve 2.5 ml AF Protect Dip in 5 litres of saltwater or water taken directly from the tank. Immerse the coral in the prepared solution and gently clean its surface by rinsing with water or using a toothbrush. The bath should take up to 5 minutes. To rinse, transfer the coral into a container filled with clean saltwater. Transfer the cleaned coral back into the tank. Once used, the solution may not be reused. Do not pour the solution into the aquarium. Do not use the product if fish, snails, mussels, crabs or shrimp are in the tank. Use only out of the tank. Not suitable for human consumption.

    Learn More
    $32.55

  12. AquaForest AF-110 Media Reactor 39cm High

    A fluidising reactor, intended for use with different types of filter media, It works perfectly as a reactor for Phosphate Absorbers, Activated Carbon and Zeolites. Thanks to the compact dimensions, it can be used both internally in the sump or externally. The Reactor is made entirely from high quality – 100% acrylic, making it resistant to damage and discolouration. We used a silicone seal which protects the filter against leakage. Inside the filter are sponges with a special fixture to prevent deformation of the internal sponge – it prevents also the passage of filter medium outside the filter housing (important in the case of resins or absorbers – like GFO). Important thing is also that our media reactors are very solid and nicely made. We recommend the use of 3 Aquaforest Media, Zeo Mix, Carbon and Phosphate Minus in combination.

    Diameter pipe: 110mm

    Height: 39cm

    Connections: 20mm

    Accommodates up to: 3L (6.34 US pt)

    The width of the cylinder: 15cm

    Learn More
    $171.45

  13. AquaForest AF-90 Media Reactor 30cm High

    A fluidising reactor, intended for use with different types of filter media, It works perfectly as a reactor for Phosphate Absorbers, Activated Carbon and Zeolites. Thanks to the compact dimensions, it can be used both internally in the sump or externally. The Reactor is made entirely from high quality – 100% acrylic, making it resistant to damage and discolouration. We used a silicone seal which protects the filter against leakage. Inside the filter are sponges with a special fixture to prevent deformation of the internal sponge – it prevents also the passage of filter medium outside the filter housing (important in the case of resins or absorbers – like GFO). Important thing is also that our media reactors are very solid and nicely made. We recommend the use of 3 Aquaforest Media, Zeo Mix, Carbon and Phosphate Minus in combination.Tube Diameter: Diameter pipe: 90mm

    Height: 30cm
    Connections:16mm
    Accommodates up to: 1.6L
    The width of the cylinder: 13cm

     

    Learn More
    $127.84

  14. AquaForest AFix Glue 110gr

    Special plastic two-component mass for joining small rocks and attaching stony corals to rocks. It does not cause water impurity and is not toxic for reef animals. Both components should be mixed in equal amounts
    outside the aquarium and then used within 30min.

    Learn More
    $15.88

  15. AquaForest Component 1+ 2+ 3+ 15000ml (15L)

    Chemical composition of Component 1+2+3+ is based on the method developed by H. Balling. The formula has been fine tuned in our lab and enriched with trace elements that are fundamental for maintaining marine aquarium organisms in good form. As a result we have composed 3 fluids that are intended for dosing in equal amounts on regular basis. Component 1+2+3+ is designed to fulfil coral demands not only in terms of Magnesium and Calcium, but also in terms of other elements which require careful and systematic dosing, but are notoriously difficult to assess. In order to maintain adequate amount of trace elements in aquarium water, both Magnesium and Calcium levels need to be within recommended range (Ca 400-440 mg/L, Mg 1280-1350 mg/L) Typical aquarium with average number of hard corals requires approximately 50ml of each component per 100 l (27 US gal) of water daily. Dosage needs to be adjusted according to the consumption of macro-nutrients, and based on critical water parameters like Calcium, Magnesium and KH. If one or two parameters are still not balanced- we recommend to continue with administering equal doses of each component, and take advantage of one of our additives (Calcium, Magnesium, KH Buffer) to restore desired level(s).

    Learn More
    $73.08

  16. AquaForest Component A 150ml

    Component designed for supplementing strontium and barium in marine aquarium. It should be applied at least once a week in a dosage of 10 drops for 10l of aquarium water or 10ml (one top) for 200l (54 US gal.) of water – with average coral planting.
    US:19 drops for 5 US gal. of aquarium water or 10ml (one cap) for 54 US gal. of water.

    Learn More
    $8.65

  17. AquaForest Component A 2000ml

    Component designed for supplementing strontium and barium in marine aquarium. It should be applied at least once a week in a dosage of 10 drops for 10l of aquarium water or 10ml (one top) for 200l (54 US gal.) of water – with average coral planting.
    US:19 drops for 5 US gal. of aquarium water or 10ml (one cap) for 54 US gal. of water.

    Learn More
    $34.05

  18. AquaForest Component B 150ml

    Component designed for supplementing heavy metals (cobalt, copper, chromium, manganese, vanadium, zinc, nickel, iron) in marine aquarium. It should be applied at least once a week in a dosage of 10 drops for 10l of aquarium water or 10ml (one top) for 200l (54 US gal.) of water – with average coral planting.
    US: 19 drops for 5 US gal. of aquarium water or 10ml (one cap) for 54 US gal. of water.

    Learn More
    $8.65

  19. AquaForest Component B 2000ml

    Component designed for supplementing heavy metals (cobalt, copper, chromium, manganese, vanadium, zinc, nickel, iron) in marine aquarium. It should be applied at least once a week in a dosage of 10 drops for 10l of aquarium water or 10ml (one top) for 200l (54 US gal.) of water – with average coral planting.
    US: 19 drops for 5 US gal. of aquarium water or 10ml (one cap) for 54 US gal. of water.

    Learn More
    $34.05

  20. AquaForest Component C 150ml

    Component designed for supplementing iodine and fluorine in marine aquarium. It should be applied at least once a week in a dosage of 10 drops for 10l of aquarium water or 10ml (one top) for 200l (54 US gal.) of water – with average coral planting.
    US: 19 drops for 5 US gal. of aquarium water or 10ml (one cap) for 54 US gal. of water.

    Learn More
    $8.65

Items 1 to 20 of 48 total

Page:
  1. 1
  2. 2
  3. 3

List  Grid 

Set Descending Direction