Welcome to our online shop!

Aquaforest

8 Item(s)

List  Grid 

Set Descending Direction
  1. AquaForest AF Poly Glue 600g

    Polymer adhesive for corals.
    Usage: Glue granules should be placed in hot water (about 60ºC/ 140ºF); after a few minutes easily forming mass will create, which has the best adhesive properties. The adhesive will become completely solid when placed in the aquarium. We recommend that gluing process is performed out of the water. Coral can be placed in the water 30 seconds after bonding. Unused mass can be used again. Biodegradable product.

    Learn More
    $26.95

  2. AquaForest AF-110 Media Reactor 39cm High

    A fluidising reactor, intended for use with different types of filter media, It works perfectly as a reactor for Phosphate Absorbers, Activated Carbon and Zeolites. Thanks to the compact dimensions, it can be used both internally in the sump or externally. The Reactor is made entirely from high quality – 100% acrylic, making it resistant to damage and discolouration. We used a silicone seal which protects the filter against leakage. Inside the filter are sponges with a special fixture to prevent deformation of the internal sponge – it prevents also the passage of filter medium outside the filter housing (important in the case of resins or absorbers – like GFO). Important thing is also that our media reactors are very solid and nicely made. We recommend the use of 3 Aquaforest Media, Zeo Mix, Carbon and Phosphate Minus in combination.

    Diameter pipe: 110mm

    Height: 39cm

    Connections: 20mm

    Accommodates up to: 3L (6.34 US pt)

    The width of the cylinder: 15cm

    Learn More
    $159.25

  3. AquaForest AF-150 Media Reactor 45cm High

    A fluidising reactor, intended for use with different types of filter media, It works perfectly as a reactor for Phosphate Absorbers, Activated Carbon and Zeolites. Thanks to the compact dimensions, it can be used both internally in the sump or externally. The Reactor is made entirely from high quality – 100% acrylic, making it resistant to damage and discolouration. We used a silicone seal which protects the filter against leakage. Inside the filter are sponges with a special fixture to prevent deformation of the internal sponge – it prevents also the passage of filter medium outside the filter housing (important in the case of resins or absorbers – like GFO). Important thing is also that our media reactors are very solid and nicely made. We recommend the use of 3 Aquaforest Media, Zeo Mix, Carbon and Phosphate Minus in combination.

    Diameter pipe: 150mm

    Height: 45cm

    Connections: 20mm

    Accommodates up to: 7.2L (1.91 US gal)

    The width of the cylinder: 19cm

    Learn More
    $263.06

  4. AquaForest KH Buffer 1200g

    An agent to maintain constant carbonate hardness in coral reef aquaria. Dissolve 80 g of the product in 1000 ml of deionized water. To maintain ion equilibrium, use Calcium, Magnesium and Reef Mineral Salt Aquaforest products as well. 10g KH Buffer increases by about 3,3 dKH (Alk. 1,18meg/l) in 100L. 100ml KH Buffer solution increases by about 1,60 dKH in 100L of water. The recommended KH level in coral reef aquaria is 6.5- 8.0 dKH. Contains NaHCO3. US: Dissolve 1.28 cups of the product in 1 US gal. of deionized water. 

    Learn More
    $11.70

  5. AquaForest Phosphate Minus 5000ml

    Effective fluidization filters medium. During absorption it reduces phosphates and silicates in marine and freshwater aquariums. PhosphateMinus should be placed in flow filters in 25-100 ml for 100 l (27 US gal.) of water in marine aquarium or 200l in freshwater aquarium.

    Learn More
    $139.50

  6. AquaForest Stone Fix 1500g

    Quickly bonding glue based on cement. Best for joining large elements of live or ceramic rock. It does not contain toxic compounds which makes it 100% safe for fish and invertebrates.

    Method of use: small amount of glue should be mixed with water until homogeneous, plastic consistency. Start linking the elements immediately. Dry linking is recommended. In case linking under water is necessary, switch off all circulatory and shunt pumps, link individual elements and leave for bonding for 15 minutes. Temporary water blushing will not be harmful. For large percentage of plants in aquarium, linking of no more than 2-3 elements a day is recommended as the sediment might slightly elevate the water pH in aquarium.

    Learn More
    $13.75

  7. AquaForest Stone Fix 6kg

    Quickly bonding glue based on cement. Best for joining large elements of live or ceramic rock. It does not contain toxic compounds which makes it 100% safe for fish and invertebrates.

    Method of use: small amount of glue should be mixed with water until homogeneous, plastic consistency. Start linking the elements immediately. Dry linking is recommended. In case linking under water is necessary, switch off all circulatory and shunt pumps, link individual elements and leave for bonding for 15 minutes. Temporary water blushing will not be harmful. For large percentage of plants in aquarium, linking of no more than 2-3 elements a day is recommended as the sediment might slightly elevate the water pH in aquarium.

    Learn More
    $45.99

  8. AquaForest Zeomix 1000g

    A specially selected blend of zeolites. For use in marine and freshwater aquaria. Zeo Mix should be replaced every 6 weeks, the volume to use is between 100-500 ml per 100 liters of water in the aquarium. Zeolites do not require shaking – they can be placed in fluidised filter. The recommended flow through the bed is 300-500 Ltrs /h. Zeo Mix should be used in coral reef aquaria only by experienced aquarists as the zeolites have very high adsorptive properties, potentially leading to water being stripped too fast of elements. US: 3.5 oz.-17.5 oz. for 27 US gal. of aquarium water. Keep away from children! Product for aquarium use only! Not suitable for human consumption!

    Learn More
    $13.75

8 Item(s)

List  Grid 

Set Descending Direction